The U.S. power grid is in a sorry state. The 2025 ASCE Infrastructure Report Card delivered a devastating D+ grade for the country’s energy infrastructure, citing that “Electricity peak demand growth is at its highest point in two decades” that is “adding immense strain to an already fragile and aging electric grid.” To try to improve the grid, that same report states that, “As of 2024, more than 28,000 miles of transmission development is anticipated over the next 10 years.”
With utilities investing more time and resources to strengthening the power grid, it’s essential that they make the right choices when selecting utility pole materials. The “best” utility pole for any given installation depends on many factors. Here are some qualities to consider when specifying utility poles.
Strength and Durability
When it comes to strength and durability, the “right” pole material choice depends largely on the type of load the pole will carry. Steel is unquestionably the strongest material choice, combining high tensile and compressive strength with a lighter total weight than concrete. This is why steel poles usually carry high-voltage and long spans as well as heavy conductors. Concrete can also carry tall, heavily loaded structures used in transmission. Composites and wood tend to be better suited to sub-transmission, distribution and telecom, with FRP offering the additional benefit of animal and pest resistance and often-superior ability to withstand hurricanes, floods and extreme weather without failure. Various research-based studies such as FRP durability research and utility pole failure analysis that, when combined with in-field use data, allow manufacturers to make claims about the service life of different materials.
| Material | Strength | Durability | Best for |
| Steel | High | Long service life (~50-80 years) with proper maintenance | Transmission |
| Concrete | Very high | Long service life (~50-80 years) as long as rebar has not corroded | Transmission and heavy distribution |
| Wood | Variable (always choose appropriate ANSI Class for your application) | Shorter service life (~30-50 years) in ideal conditions | Distribution and telecom |
| Fiberglass | Heavy (very high strength-to-weight ratio) | Long service life (~50-80 years) | Sub-transmission, distribution, and telecom |
When it comes to strength and durability, the “right” pole material choice depends largely on the type of load the pole will carry. Steel is unquestionably the strongest material choice, combining high tensile and compressive strength with a lighter total weight than concrete. This is why steel poles usually carry high-voltage and long spans as well as heavy conductors. Concrete can also carry tall, heavily loaded structures used in transmission. Composites and wood tend to be better suited to sub-transmission, distribution and telecom, with FRP offering the additional benefit of animal and pest resistance and often-superior ability to withstand hurricanes, floods and extreme weather without failure. Various research-based studies such as FRP durability research and utility pole failure analysis that, when combined with in-field use data, allow manufacturers to make claims about the service life of different materials.
Because wood degrades over time faster than the other three materials and is more susceptible to extreme weather, many utilities are choosing to combine the cost-effectiveness of wood with the durability of composites, staggering an FRP pole every four to six poles to minimize cascading outages and strengthen the grid.
When fire resistance is the chief priority, only wood poles require a fire-resistant sleeve, whereas steel, concrete and some composites, like FireStrong® poles, have in-built fire resistance.
Weight
| Material | Weight for a 40-Foot Pole | Impact on Installation |
| Steel | Moderate: around 1,200 to 1,500lbs | Usually requires a crane; poles must be assembled in segments |
| Concrete | Heaviest: around 2,500 to 4,000lbs | Requires heavy-lifting equipment |
| Wood | Moderately heavy: around 1,500 to 1,700lbs | Usually handleable with light equipment and sometimes manually |
| Fiberglass | Lightest: around 600 to 900lbs | Easiest to handle with the fewest required crew and equipment needs |
Composites win on weight. The engineered material has a very high strength-to-weight ratio, meaning that the material needed to result in a high-strength result is much lower than for a material like concrete. This gives utilities an edge especially when speed and access are factors. Composites are the easiest material to install in difficult-access locations, because they are light enough for delivery and installation by helicopter or smaller truck. And because they require no specialty equipment or joining modular or sectional pieces and are so lightweight, crews can get composite poles installed faster than heavier materials to minimize disruptions to traffic or utility service.
Corrosion Resistance
| Material | Corrosion Resistance |
| Steel | Rust-prone, requiring coatings or galvanizing for prevention |
| Concerete | Resists rot, but steel rebar can spall or corrode, degrading the overall structure |
| Wood | Requires chemical treatment to avoid rot, which may preclude use near sensitive areas due to risk of leaching chemicals into soil or groundwater |
| Fiberglass | Inherently resistant to corrosion and rot; may suffer UV some degradation over time |
Fiberglass is the clear leader when corrosion resistance is the priority. Reliant on no metal or organic parts, composite poles don’t rust or rot. This quality makes composite poles a very strong choice for high-salt areas and places with high humidity, such as coastlines, and for installations near corrosive chemicals, as on the grounds of large industrial plant.
Impact Resistance and Performance
| Material | Impact Resistance | Impact Performance |
| Steel | Very high impact resistance (may dent or bend but rarely breaks) | Material rigidity means a vehicle impact can be fatal to occupants unless pole is designed with a breakaway base |
| Concrete | Little to no material flexibility, resulting in a brittle cracking or shattering failure | Impacts may often be fatal to vehicle occupants |
| Wood | Variable (based on degradation level of the wood’s fibrous structure) | Likely to crack or snap on impact |
| Fiberglass | Designed to flex on impact (may even return to original profile) | Higher energy absorption rate means much lower injury and fatality risk to vehicles |
Composite poles are gaining popularity for safety and resiliency reasons. Steel and concrete poles are extremely rigid, which helps them stay upright under extreme power loads and in harsh weather conditions. But this rigidity means that a vehicle striking the pole will absorb nearly all of the crash energy, which can cause injuries or fatalities to vehicle occupants. A breakaway base can mitigate this result for installations near roadways.
Fiberglass poles are more rigid than wood but less than steel or concrete. Their modulus of elasticity means that composite poles can take a hit and can often return to their original shape instead of crumbling like concrete, snapping like wood or permanently denting like steel. It also means that the FRP pole absorbs much of the impact energy, resulting in lower risk to life and wellbeing for vehicle occupants.
Conductivity
| Material | Electrical Conductivity | Thermal Conductivity |
| Steel | Very high (must be carefully grounded) | Very high |
| Concrete | Very low (concrete itself is nonconductive though steel rebar must be grounded) | Very low |
| Wood | Moderate/Low (very low when dry, moderate when wet) | Moderate/Low |
| Fiberglass | Very low | Very low |
Preventing electric shock is essential for power poles. Different materials will require different shock mitigation strategies. Steel is highly conductive, and each pole must be grounded and bonded, and workers should always work with nonconductive PPE. Concrete itself isn’t conductive, but the steel rebar embedded within is and must be grounded. The metal hardware on wood poles must be carefully grounded, and extra care must be taken when absorbent wood poles are wet, as water conducts electricity. Composite poles also require any metal attachments to be grounded, but the material itself has excellent dielectric strength and is innately nonconductive, even when wet.
Design Flexibility
| Material | Design Flexibility |
| Steel | Moderate (weldable; standard shapes available) |
| Concrete | Low (custom casting required; limited field changes possible) |
| Wood | Moderate to high (easy to cut/drill on-site; overall shape limited by nature) |
| Fiberglass | High (easy to site-drill; manmade material can be easily custom-designed) |
Some use cases require a custom design or on-site modifications to utility poles. All four materials are capable of some amount of customization but at varying degrees of difficulty. Fiberglass has the greatest flexibility as a lightweight, manmade material. Concrete and steel are highly customizable, though weight and joining methods can complicate customization. Wood is extremely easy to cut or drill on-side, but the overall pole shape is inherently limited by nature.
Costs
| Material | Initial Cost | Installation Costs | Maintenance Costs | Total Cost of Ownership |
| Steel | High | Moderate/High | Moderate | Moderate/High |
| Concrete | High | High | Low | Moderate |
| Wood | Low | Low | High | Moderate/High |
| Fiberglass | High | Moderate/Low | Very Low | Low |
First cost isn’t the final word in price. The true cost of utility poles (of any investment, really) is a combination of initial, installation and maintenance costs. Fiberglass poles have a higher initial cost than most other materials, but they also have the lowest total cost of ownership due to their ease of installation, very low maintenance requirements and long lifespan. By contrast, wood poles are often the least expensive at first purchase, but some utilities report replacing wood poles as soon as five years after installation. There are times when project conditions demand a specific pole material, but when shopping options only by price tag, use total cost of ownership to do the math.
What's the Best Pole Material?
Trick question! No single pole material will be best for every single case. Knowing the pros and cons of steel, concrete, wood and fiberglass poles for various criteria empowers specifiers with four solid pole material options to choose from based on use-case factors like application, availability and geography.
Creative Composites Group is the largest structural composites manufacturer in the U.S. and is the maker of the CompositeStrong line of composite poles: StormStrong, TridentStrong and FireStrong. Learn more about CCG’s Strong family of poles.